Canon EOS 40D νέο Firmware

[Bi2L]

Δεν νομιζω οτι ειμαστε πολυ που εχουμε την 40D εδω...

...αλλα σιγουρα ειμαστε 3-4 ατομα

 

Λοιπον βγηκε το νεο Firmware για την 40D εκδοση 1.1.1 απο την 1.0.8 που ηταν πριν (για οποιον ειχε κανει την αναβαθμηση ή την αγορασε με το 1.0.

 

What has changed in Version 1.1.1?

 

The following fixes and improvements have been incorporated.

 

1. Fixes a malfunction that in rare occurrence causes a low battery indication to be displayed when using the EF 85mm F1.2L II USM lens. Depending on the battery check timing of the camera, the battery level displayed on the camera's LCD data panel may shows Battery will be exhausted soon or Battery must be recharged, even though the battery capacity is sufficient.

This phenomenon may occur only when using the EF 85mm F1.2L II USM lens in combination with the EOS 40D and does not occur with other cameras and lenses.

 

2. Fixes a malfunction that in rare occurrence causes an Err 06 Self Cleaning Sensor malfunction to appear on the camera's LCD monitor and LCD data panel, even when the Self Cleaning Sensor Unit is operating normally. This message may appear depending on the timing of when the camera is switch to the ON position.

 

3. Fixes a malfunction that prevents correct colors from being printed when direct printing. RAW images captured using the camera's custom Picture Styles (Emerald, etc.), which have been downloaded from Canon's Web site and registered under User Def. 2 or User Def. 3.

The raw image data captured under the above conditions does not have any problems. This phenomenon only occurs during direct printing.

 

4. Modifies the level of subject brightness that causes the AF-assist beam to fire when using an external Speedlite.

The AF-assist beam of the external Speedlite fires even when the brightness of external light does not require it.

 

5. Enables an external flash connected to the camera's synchro terminal to fire even when the camera's built-in flash is popped up.

 

στο παρακατω link θα βρείτε το νεο Firmware και τις οδηγιες για την αναβαθμηση.

 

http://web.canon.jp/imaging/eosd/eos40d/eos40d-firmware-e.html

[Βασίλης_Μ]

Από τα 5... μόνο το 4 μου κάνει.... . Μάλλον θα το κατεβάσω....

 

Ευχαριστούμε....

[lunar]

Mια χαρα ευχαριστω

 

Φιλικα Δημητρης